Key Grabber: Sale of Codegrabbers, Repeaters and Programmers

Cryptograbber «МРС» for Mersedes 2010-2023

This device scans the Keyless-GO system keys, remembers the codes and sends commands to the car to disarm, open, close and arm. It is compatible with all cars equipped with the Keyless-GO system, operating at 433 MHz and 315 MHz, since 2010.

The number of codes scanned is 10 (5 times for opening and closing). For the FBS4 system, the device functions as a remote control, and for the FBS3 system - only with the Keyless-GO system (requires touching the door handle).

Important! If after scanning the key and entering the codes to open or close the car, the original key was used, the scanned codes become irrelevant, and a new key scan is required.

Compatibility: Works with such keys, but does not support Mercedes Benz W223.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Cryptograbber «Iskra» model «Mini» for Mitsubishi

SMART KEY emulation system for MITSUBISHI cars

DEVICE FUNCTIONALITY:

The "ISKRA mini" device allows you to open, close and start the car engine, even if all the keys are lost! It is compatible with cars intended for the European, American and Japanese markets. Equipped with a 3D antenna for high-quality signal reception from the car and made in a case resembling a key fob.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Cryptograbber "Iskra" model "Mini" KIA – HYUNDAI

SMART KEY emulation system for KIA and HYUNDAI cars

DEVICE FUNCTIONALITY:

The "ISKRA mini" device allows you to open and close doors, as well as start the car engine, even if all the keys are lost! It supports cars intended for the markets of Europe, America, Russia and Japan. The device is equipped with a 3D antenna for high-quality signal reception from the car and is made in the form of a compact key fob.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

New smart key emulator Iskra-3 for KIA 2024. DEVICE CAPABILITIES:

1. The device allows you to open, close or start the car engine, even if all the keys are lost!
2. It displays the calculated PIN code for programming keys through the diagnostic connector.
3. Data calculation for new cars by PIN code is carried out directly on the device, without the need for a computer.
4. A PC program that speeds up calculations for new cars.
5. 3D antenna ensures high-quality data reception from the car.
6. A unique PIN code is required to activate the device.
7. Power is supplied by LiPo batteries.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Cryptograbber "Space" new Toyota\Lexus\Subaru AA,A9,A8,88,F3

New CryptoGrabber key modulator for Toyota/Lexus (2015-2022)

Important for information! This device is only compatible with cars equipped with a keyless entry system on the European market with a frequency of 433 MHz and on the American market with a frequency of 315 MHz.

- Works only with keys A9, A8, AA, 88, F3!
- Unlimited number of memory cells.
- The smart key recording range is 15-35 meters.
- Key code calculation time is from 1 to 3 hours.
- Full emulation of the original key.
- Allows you to open, close and start the car at any time.
- The device does not damage the original key.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

New Keyless Go cryptograbber emulator - P30 Infiniti key emulator - Nissan, KIA codegrabber KeylessGO

Introducing the new product of 2022 — the Cryptograbber Keyless emulator for Infiniti and Nissan P30.

The P30 code grabber for Infiniti, Nissan, Mercedes X-Class, Hyundai, Genesis, Kia and Mitsubishi is a simple and convenient device that replaces several specialized gadgets. This is an emulator of keyless entry systems, developed on the basis of Bluetooth Audio Adaptor. Externally, the device does not differ from the usual accessories and does not have any visible cables, antennas or other modifications. The P30 code grabber is the smallest and most compact device on the market.

With the help of the P30 code grabber, you can open and start a car with a keyless entry system without preliminary preparation. The device performs diagnostics on its own and within a few seconds emulates the original smart key, becoming its clone, which allows you to open the car, start the engine and move on.

Features:

- Activation using a unique PIN code.
- Menu with a choice of Russian or English languages.
- Ease of use - even a child can handle it.
- A week of operation on one battery charge.
- Charging via USB.
- Remote update option.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

New Keyless Go cryptograbber emulator — P33 Toyota/Lexus KeylessGO codegrabber

CryptoGrabber key emulator for Toyota and Lexus, model Codegrabber GameBoy P33 (2015-2022).

Note: The device is intended exclusively for authorized car services and legal use. The user is responsible for its illegal use!

This device is only compatible with cars equipped with a keyless start system for the European market at 433 MHz and the American market at 315 MHz.

- Works only with A9 and AA keys.
- Memory capacity - 20 cells.
- The smart key recording range is 15-35 meters.
- Key code calculation time is from 25 to 90 minutes (on average 35 minutes).
- Fully emulates the original key.
- Allows you to open, close and start the car at any time.
- The device does not damage the original key.

Prohibited in some countries!

Attention:The purpose of the offered devices is to help auto mechanics and electricians around the world to perform their duties. It is not recommended to use the devices for illegal purposes. These devices should not be purchased by persons whose work is not related to the repair and maintenance of cars, with the exception of state or officially registered special services. Remember that theft of personal belongings and illegal entry into private property is a crime punishable by law in any country!

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Crypto Grabber "Iskra" model "Mini" Infiniti-Nissan-Mercedes-Renault

Spark mini for KIA — HYUNDAI — 11,000 EURO

Spark mini for INFINITI — NISSAN — MERCEDES X-CLASS — RENAULT ALASKAN — 11,000 EURO

CRYPTOGRABBER «SPARK» MODEL «MINI» for MITSUBISHI — 4,000 EURO

SMART KEY emulation system for MITSUBISHI / NISSAN / INFINITI / RENAULT and MERCEDES

DEVICE FUNCTIONALITY:

The «ISKRA mini» device can open, close or start the car engine, even if all the keys are lost!
Cars for the markets of Europe, America, Russia and Japan are supported.
3D antenna provides high-quality signal reception from the car.
The device is made in the form of a keychain.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Crypto Grabber "Iskra-2" Kia-Hyundai-Mitsubishi-GENESIS-INFINITI-NISSAN-MERCEDES-RENAULT

DEVICE CAPABILITIES:

1. The device can open, close or start the car engine even if all the keys are lost!
2. Displays the calculated PIN code for programming keys via the diagnostic connector.
3. Intelligent data calculation algorithm (usually takes about 1 minute).
4. The ability to calculate data for new cars by PIN code directly in the device without using a computer.
5. A program to speed up calculations for new cars on a PC.
6. 3D antenna for high-quality data reception from the car.
7. 40 memory cells.
8. Unique PIN code for activating the device.
9. Powered by two AA batteries.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Codegrabber P31 Keyless Nintendo Tetris Gameboy

The operating principle of the keyless entry system, known as Keyless Go, is both simple and technically complex. This system is a key with a special electronic unit that interacts with the on-board access system of the car at a relatively short distance.

The form of the device can be different - it can be a key, a key fob or a card. The main thing is not in the form, but in the content - a compact electronic microcircuit with an encoded code.

When the owner approaches the car at a certain distance, the system recognizes the code, unlocking the protection and door locks. When getting into the car, it is enough to press a button to start the engine. When the owner gets out, the system automatically locks the doors and disconnects the electrical circuits, losing the signal.

The P31 code grabber is based on the GameBoy game console. Visually, it is no different, does not require connecting wires and modifications.

Features of the P31 code grabber:

- Case for GameBoy console
- Switching on with a unique PIN code
- Menu with language selection (Russian or English)
- Ease of operation - accessible even to children
- A week of operation on one charge
- Charging via USB
- Remote update option

Operation:

To use the device, just go to any point of the car with a keyless access button, touch or press the device. It will record the signal from the car and within 10 seconds to 2 minutes will select the desired key, completely duplicating the original. The key can be saved in the device's memory for future use. You can open, close, start and drive the car at any time.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

PHONE device version 4.5 for emergency disarming and start of Toyota / Lexus cars and utilities for working with car keys.

Instructions:

Nokia ASTPRO ENG

Unlocker, opener for Toyota-Lexus 2015+ new design

Instructions:

MANUAL JBL AST PRO TOYOTA LEXUS EN

The device is designed to disable the standard security system of Toyota and Lexus cars manufactured after 2017.

The device is connected to the headlight connector on the outside of the car, and to the BCM module on the inside.

The device is not intended for illegal use, but only for emergency removal of car security by special services.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Codegrabber PANDORA FANTOM NEW VAG FORD KIA

Pandora FANTOM new version 1.6.4

Features of the Pandora Phantom device

This is a young but very promising project that is constantly evolving and updating. The Pandora Fantom code grabber has the following advantages:

- Individual activation PIN code that can be changed by the user.
- Two menu languages: English and Russian.
- Automatic reception mode for filling and storing the signal in all 20 memory cells.
- Reception in two modulations AM and FM.
- Reception at different signal frequencies: 315, 433, 868 MHz.
- Decoding a large list of signals from new cars up to 2020.
- Remote update.

Pandora Fantom systems are designed to intercept and decode complex additional and standard car security systems that use dialogue codes. Modern code grabbers are produced in standard key fob housings. One antenna has FM and AM radio channels that can be switched. The device is capable of recording encryption algorithms for both channels and has the ability to switch the signal reception frequency: 315, 433, 434, 868 MHz.

Advantages of Pandora Phantom

The key fob receives and decrypts coded signals from the car. After processing the signal, the desired code (algorithm) is selected, and the car can be opened using the already selected code. The grabber can also operate in code substitution mode, accumulating all the information and intercepting the next transmission, transmitting the first saved copy. Instant information replacement is carried out in a split second, which allows you to quickly and effectively remove the vehicle from security.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Codegrabber Pandora P24 NEW USA and EUROPE

This is one of the best devices to date, equipped with seven operating modes for intercepting signals from standard and additional alarms. It can open barriers and gates of various designs. You can buy the Pandora 2016 code grabber in our store at the best price.

Important note:

On the black market, you can find many devices for intercepting signals, the so-called code grabbers. Over the past few years, a large number of new devices and key fobs have appeared, but the main list of supported models remains virtually unchanged. Many of them are old models in new packaging. The Pandora P24 device in the DXL 3970 (D600-D605) case is a truly revolutionary device that demonstrates high efficiency, reliability and a reputation confirmed by many years of improvements and the ability to remotely update without the need to buy new, questionable models.

!!! Do not confuse the so-called code grabbers Pandora 2.4, 2.5 and others with Pandora P24!!!

About the main thing:**

Due to the influx of the American car market to Europe, Ukraine and the CIS countries, the question is often asked: why is there no 315 MHz and why P22 (BMW) in a separate device? As we noted earlier, progress does not stand still, and with every day, hour, minute and second the future is already here. What does the consumer want? Maximum benefit, ease of use, versatility and the ability to update for minimal funds.

What has changed:

The device is made in the well-known Pandora DXL 3970 car alarm key fob, but now with an added external antenna, which almost doubled the signal reception and allowed it to work correctly on all frequencies. Now a powerful regular code grabber can combine all four main frequency ranges in one device. With the help of quick switching with one button, it can work in one of the ranges - 433, 434, 315, 315fm, 868 MHz and mode P19. This covers the entire American, European, Korean, Chinese and Japanese car industry. The device works with a large list of regular and additional car alarms, including gates, barriers, shutters and roller systems.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Codegrabber Barrier Release TEMPORARILY STOPPED. NOT MANUFACTURED

The code grabber is designed to work with various automatic locking systems and is a universal key fob that can open automatic systems such as barriers, gates, blinds, roller shutters, automatic wickets and anti-vandal systems that are controlled by a remote control, but not GSM. For GSM automatic systems that are opened using a mobile phone, a GSM Gate+ device is required. The peculiarity of this remote control is that it is a training one - a master key fob!

Universal remote control - code grabber with a telescopic antenna, LCD screen and 125 kHz RFID module. One universal key fob can store up to 99 remote controls from an extensive list of compatible alarms, firmware 2019.

The grabber is made in a compact plastic case and has a retractable antenna, a built-in RFID module (for cloning cards and tags of intercoms and barriers at 125 kHz), an informative LCD screen, 5 control buttons and a convenient scroll that works on the principle of a joystick, which allows you to easily navigate the menu.

The code grabber for barriers is an air scanner, a training key fob for RFID tags and cards at 125 kHz, with the ability to change the language in the settings (Russian and English menu). If necessary, you can set your own PIN code to turn on the device. In the universal key fob for barriers and gates, in addition to the standard frequencies in AM modulation (433.92 MHz, 434 MHz, 315 MHz, 868 MHz), you can also manually set the frequency, as well as clone cards and tags at 125 kHz. (To open GSM automation, GSM GATE+ is required).

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Code grabber for gates, barriers & RFID cards Alpha

Universal remote control for garage doors, automation and barriers, barriers and other devices.

We present you the best code grabber for various types of automation. The device supports barriers, gates, roller shutters and barriers that are controlled by a remote control. The universal code grabber for barriers copies the signal coming to the barrier from the original remote control and automatically saves it in a memory cell. After that, you will be able to open and close the barrier, gate, roller shutters and barriers. Our device completely duplicates the original remote control and supports all its functions.

The new version has added:

- Support for the NORMSTAHL system.
- Increased range of reception and transmission.
- Improved substitution for FAAC.
- Fast code catching.
- Complete device shutdown.

Important: The main feature of the device is not only recording and opening, but also full copying and playback of all functions. We will not list the compatible devices, as its capabilities are limitless! With the code substitution mode, it can handle almost all tasks that previously seemed impossible. The device has been tested on all possible devices and surpasses its predecessors! Convenient menu and quick control make it the best on the market of automation scanners. The device is very convenient to use if you have many different devices: you can add all your devices to one device and get rid of losses and hassle, use the code substitution or autoscan mode and open what you have long dreamed of!

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Codegrabber Pandora DXL 5000 NEW UPDATE 2024

The latest version of the device.

The device is made in the form of a Pandora keychain (DXL 5000).

Codegrabber Pandora DXL 5000 - a feature of this device is 5 operating modes. The equipment is capable of opening both standard and additionally installed alarms. Another feature of the DXL 5000 model is the operation with remote controls for electronic gates and barriers.

Characteristics of Pandora DXL 5000

Pandora 5000 NEW is truly unique in its characteristics. The device has 10 memory cells. By this indicator, it can be distinguished from fakes and cheap analogs that have a full external property, but use 30 cells. The number of cells does not affect the performance, the model works flawlessly thanks to 5 modes.

The Pandora DXL5000 grabber saves the received codes even when the battery is discharged. A powerful transmitter allows you to receive and send signals over long distances. 5 operating modes and the ability to change the frequency help to find an opportunity to hack any system. Pandora DXL 5000 can be blocked with a personalized PIN code.

Advantages of the Pandora DXL5000 code grabber

The Pandora DHL 5000 code grabber has many functions that only a rare analogue can boast of. Many devices work in only one mode, a couple of memory cells are enough to use them, but the developers do more, although there is no practical sense in this. In the case of the model in question, all the characteristics are justified, 10 cells are the optimal number.

The Pandora DXL code grabber can be used not only for hacking, many car owners use it to protect their car and identify its vulnerabilities. Remember that the equipment is not sold with the purpose of inducing customers to break the law. The device must be used for legal purposes.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Codegrabber SHERIFF ZX 940

Personal transport security is a concern for all car owners. The level of security of modern alarms is increasing in parallel with the growth of the level of burglars who are looking for ways to bypass the protection of the cars they are interested in, using the Sheriff ZX 940 code grabber.

Code grabbers are designed to intercept the signal of the security system, generate a key and gain access to the car. They are created on the basis of official alarm units, which makes their work quite effective. However, their appearance also contributed to the improvement of the level of protection: the devices are used to study the functionality of security systems, test them and develop new protection methods, which makes them in demand at service stations and in companies engaged in the development of car alarms.

The Sheriff ZX 940 code grabber is one of the popular models. This is a multifunctional device that supports more than 150 systems operating in the AM range.

The device has a fresh alarm database and is distinguished by a long battery life.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Codegrabber Scher-Khan Magicar 5 (Maximum)

The device is made in the case of the Scher-Khan Magicar 5 key fob.

Today, new high-tech devices that allow you to open a car without an original key fob are becoming increasingly popular. One of these devices is a code grabber, which captures signals from the key fob and intercepts them, thereby extracting the key.

The Scher-Khan code grabber is one of the most popular devices for opening cars. It does an excellent job of intercepting the signal, which allows you to easily open almost any car, and has a number of advantages, such as:

- Security when turned on thanks to an individual PIN code.
- Automatic feedback shutdown.
- Recording from the call sensor.
- The ability to instantly delete cells and intercept a new signal using a special button.

The device fully functions as an original key fob.
Working display and functions of the original key fob.
Supports the maximum number of car alarms.
The code grabber has 4 memory cells.
Additional communication channel (autostart, trunk opening).
The device blocks the signal transmission to the original key fob with feedback, which means that the owner will not receive a notification that the car has been opened or closed.
This is the best professional device in its class.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

New Keyless Go Cryptograbber Emulator — P32 Toyota/Lexus KeylessGO Only Codegrabber

New Keyless Go key emulator — P32 for Toyota/Lexus, supporting code grabber 2006-2016, only KeylessGO.

The P32 code grabber is based on the second-generation GameBoy console and is visually identical, does not require connecting wires or modifications.

More detailed information about the operating principle can be found in the article about the P31 code grabber. The device is activated using a unique PIN-code menu, with a choice of language: Russian or English. Working with the device is simple and accessible even for a child. It can work up to a week on one charge, charging is carried out via micro USB, there is also the possibility of remote updating.

It is enough to go to any place in the car where the keyless access button is located, touch or press the device. It will record the signal from the car, and within 2-4 minutes will select the required key, completely duplicating the original. The key can be stored in the device's memory, allowing you to open, close, start and drive your car at any time.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Unlocker, opener for Toyota-Lexus 2024+ Open and Start

Attention: This device is intended for legal use only, such as demonstrating anti-theft protection of cars and legal evacuation of cars from unauthorized parking places by employees of car services and evacuation services. Any illegal use of the device is prosecuted by law!

The device is designed to disarm TOYOTA/LEXUS cars by connecting to the internal CAN bus of the car, as well as emulating car keys. It allows you to save car data in the internal memory in separate cells and implements the functions of diagnostics of the security system.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

PHONE device version 4.5 for emergency disarming and start of Toyota / Lexus cars and utilities for working with car keys.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Unlocker, opener for Toyota-Lexus 2015+ new design

The device is designed to disable the standard security system of Toyota / Lexus 2017+ cars.

The device is connected to the headlight connector outside the car, and to the BCM module inside.

The device is not intended for illegal use, but is intended for emergency disabling of car security by special services.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Keyless System Repeater Version 11.1

Attention! The device is not intended to commit illegal actions.

The Keyless "fishing rod" repeater is a radio transceiver designed to retransmit and amplify the received signal, which increases its transmission range. The repeater is not a code grabber. The device has several names, including "Fishing Rod", "Long Arm", "Wave", "Multibrand", and is compatible with cars equipped with a standard keyless access system "Keyless Go" or "Keyless Entry", which allows you to open the doors and start the car engine.

This device allows you to open and start a car equipped with the Keyless Go or Keyless Entry system at a distance of up to 300 meters. The communication range between the units is up to 300 meters in densely built-up areas or when operating indoors. It is important to understand that this is a power reserve for stable signal transmission in the presence of obstacles. The actual working range is usually 100-200 meters and rarely exceeds 250 meters. The range of the radio channel also depends on the battery charge in the key. The communication range reserve is necessary for stable operation, which is especially important in busy parking lots.

The communication range between the units is up to 300 meters in densely built-up areas or when operating indoors. It is important to understand that this is a power reserve for stable signal transmission in the presence of obstacles. The actual working range is usually 100-200 meters and rarely exceeds 250 meters. The range of the radio channel also depends on the battery charge in the key. The communication range reserve is necessary for stable operation, which is especially important in busy parking lots.

Another important advantage is that there is no need to precisely position the small unit inside the car. The operator simply gets into the car and drives away. The small unit works like a key: it can be located anywhere in the car.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Two-way long-range repeater TOY LEX

The device allows you to transmit a signal from cars equipped with the Keyless Entry or Keyless GO system to the key at a distance of up to 500 meters, depending on the key type and model of TOYOTA, LEXUS and SUBARU cars. This means that you can open the car or start the engine without the owner's knowledge. For the device to function correctly, the operator of the "first unit" must be near the car, and the operator of the "second unit" must be at a distance of up to 10 meters from the key.

Functions:

- The device consists of two units.
- Uses our own innovative 3D detective technology.
- Requests a frequency from the car at 134 kHz.
- Provides for the use of two types of antennas: built-in and external, which expands the functionality of the device.
- Provides its own algorithm for counteracting interference in the high-frequency range for the correct exchange of service information between the units, which guarantees high-quality operation in urban conditions with high buildings and a large amount of background interference.
- The compact size of the device allows it to be easily disguised during use.
- Innovative algorithm for automatic detection of signal type and key location when using a large block.
- Availability of informative LED displays.
- Support for all types of keys available on the market, including 98, D4, 88, 39, A8, A9, AA, BA of TOYOTA, LEXUS and SUBARU brands.
- Supports all types of key frequencies: 312 MHz (Japan), 315 MHz (America), 433 MHz (Europe and Great Britain).

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Keyless Go repeater rod long arm multi-brand RelayAttack Repeater

Attention! The device is not intended for committing illegal actions.

The Keyless repeater rod is a radio-technical device that retransmits and amplifies the received signal, increasing its range. This repeater is not a code grabber. The device has many names: universal "Rod", "Long Arm", "Wave", "Multibrand". It is compatible with cars equipped with a standard Keyless Go or Keyless Entry keyless entry system, which allows you to open the doors and start the car engine.

This device allows you to open and start a car equipped with a Keyless Go or Keyless Entry system at a distance of up to 300 meters.

The communication range between the units reaches 300 meters, but the actual working range is on average 100-200 meters and rarely exceeds 250 meters. The range of the radio channel also depends on the battery charge in the key.

A reserve in the communication range is necessary for stable operation. For example, if the work is carried out from the front door, and the key is in an apartment where the windows overlook the courtyard, there may be obstacles between the small and large units. Without sufficient communication range, the device may not work.

It is also important that the small unit does not need to be precisely positioned in the car: the operator simply gets into the car and drives away. The small part of the device works like a key and can be located anywhere in the car.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Long car signal jammer 315 433 434 868 MHz

A jammer (jammer) for remote controls and car alarms at frequencies of 315 MHz, 433 MHz, 434 MHz (VAG-Group) and 868 MHz. The device operates in one mode and is designed to suppress car key signals, which prevents the car from being locked. It is compatible with both conventional radio remotes and KeylesGO systems. The range is 200-300 meters. The device is intended for testing and use by specialized services.

A portable remote control and car alarm jammer blocks radio signals at frequencies of 433 MHz, 434 MHz (VAG-Group) and 868 MHz. The device suppresses signals from remote controls for alarms, garage doors, cars, TVs, children's toys and other equipment. The effective range of the portable unit is 200 meters or more.

Features

- The device creates interference only on the selected frequency, without affecting other ranges.
- Disables the remote control of the car and garage door.
- Can be used to suppress signals from children's toys and TVs.
- Provides maximum signal blocking power.
- High accuracy of the outgoing signal with a frequency change in the range of 4 MHz.
- The jammer operates at a distance of 200-300 meters.
- Absolutely safe for humans.

Since remote controls in different countries use different radio frequencies, this jammer is able to suppress 3 frequencies simultaneously. It is used in Europe (433-434 MHz) and Asia (868 MHz).

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Silencer for the EAC system. Shoplifting

Technical specifications:

- Very compact dimensions: 17 x 8 x 2.4 cm.
- Maximum operating time: up to 10 hours.
- Extended range: 1–4 meters.
- Suppresses RF and AM signals.
- Effective against Sensormatic, Nedap, GateWay, Amersec, Dialoc ID Corporate, DetexLine, Catalyst, MTC EAS Partners, Lucatron and others.
- Equipped with an LED indicator.
- Signals about low battery.
- Virtually invisible to most means of protection and interference detection.

The controls are simple – just one button.
Works quietly and safely.
Made of high-quality components.

The new AM+RF 2023 muffler is extremely easy to use: it is controlled by one button – On/Off. After that, the device will do everything on its own. You do not need to study a lot of materials, determine the type of signal or check security posts. With this device, the process will be quick, unnoticeable and without unnecessary worries.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Car alarm jammer and more! European and American cars 315 433 434 868 MHz

Alarm jammer for cars and other devices!

Remote controls, muffler and car alarms operate at frequencies of 433 MHz, 434 MHz (VAG group), 868 MHz, 315 MHz.

Details: This portable remote control and car alarm jammer blocks radio signals at frequencies of 433 MHz, 434 MHz (VAG-Group) and 868 MHz. The device is designed to suppress signals from remote controls of alarms, garage doors, cars, TVs, children's toys and other technical equipment. The effective range of this portable device is 50 meters or more.

Features:

- The device creates interference only on the selected frequency, without affecting others.
- Disables remote control of cars and garage doors.
- Can be used to suppress signals from children's toys and TV remotes.
- Provides maximum signal blocking power.
- High accuracy of the outgoing signal, the frequency changes in the range of 4 MHz.
- Works at a distance of up to 50 meters.
- Absolutely safe for humans.

Since different countries use different radio frequencies for remote controls, this jammer is able to block three frequencies simultaneously. It is used in Europe on 433 MHz and 434 MHz bands, and in Asia on 868 MHz.

The car alarm jammer not only blocks 433 MHz frequencies (the central frequency for remote controls in European countries), but can also suppress signals on 868 MHz.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Easy Tool Ivaylov: All in One Pack

EASY TOOL – This is not a turbo decoder, but a completely new innovative tool designed for professionals, which is used for emergency opening of locks, safes and quick opening of closed doors of cars or houses. Our tool has nothing to do with similar tools under the brand of turbo decoder. It was developed by a true genius of his craft, Dimitar Ivaylov, who put all his soul, knowledge and energy into this tool.

When evaluating our product and buying it, please note that this is a tool of our production, released under the brand of the brilliant developer of locksmith tools Dimitar Ivaylov. Our tool is different from similar ones under the brands Lucky Locks and Turbodecoder.

Buy five Easy Tools at a special package price and save an additional 15 euros for each decoder! The configuration does not matter, just select 10 decoders from the list below and indicate the selected models and quantity in the description when buying.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Decoder Easy Tool HON66 Honda NEW

EASY TOOL – This is not a turbo decoder, but a completely new, innovative tool designed for professionals, which is used for emergency opening of locks, safes, as well as quick opening of closed doors of cars or houses. Our tool has nothing to do with similar models under the brand of turbo decoder. It was developed by a true master of his craft, Dimitar Ivaylov, who put all his soul, knowledge and energy into this product.

When evaluating and purchasing our tool, please note that this is a product of our own design, released under the brand of an outstanding developer of locksmith tools Dimitar Ivaylov, and it has nothing to do with tools under the brands Lucky Locks and Turbodecoder.

Developed using innovative production technologies, which makes the Easy Tool stable and versatile.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Decoder Easy Tool VA2 Renault, Citroen и Peugeot NEW

The new VA2 decoder is designed to work with VA2 locks on Renault, Peugeot and Citroen models! This decoder only works with a full key!

The lock consists of 6 plates with 6 different cutting heights. The VA2 decoder has 2 pins on one side and 4 pins on the other.

The decoder works on a completely different scheme: its pins are shaped like small spikes. In addition, the middle wheel is fixed - it does not need to be opened or closed, which greatly simplifies the process of setting up and using. The decoder is supplied in a small box with 6 additional pins.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Decoder Easy Tool HU101 Rover Ford Volvo Jaguar 9-PIN NEW 2022

EASY TOOL – This is not a turbo decoder, but a completely new, innovative tool, specially designed for professionals. It is used for emergency opening of locks, safes, as well as for quick opening of closed doors of cars or houses. Our tool has nothing to do with similar tools under the brand of turbo decoder. This tool was created by a true master of his craft, Dimitar Ivaylov, who put all his soul, knowledge and effort into it.

When evaluating our product and buying it, keep in mind that this is a tool of our own design, released under the brand of an outstanding developer of locksmith tools Dimitar Ivaylov. Our product differs from other similar models, such as tools under the brands Lucky Locks and Turbodecoder.

If the key is missing, the professional decoder allows the operator to open and decipher the HU101 type lock using a high-speed device without the need for technical training or the use of complex techniques and locksmith kits. This eliminates delays in the opening process and minimizes the risk of damage to the lock, door, window or other parts of the car.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Decoder Easy Tool Renault Kadjar

The professional Easy Tool Renault Kadjar decoder is specially designed to work with HU84 lock profiles. It is manufactured using advanced manufacturing technologies, which makes it durable and versatile. The range includes models suitable for both Renault Kadjar cars and trucks.

Our tool is reliable and versatile thanks to the use of the latest manufacturing technologies.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Decoder Easy Tool HU84 DAF Trucks

The DAF HU84 Professional Decoder is specially designed to work with the HU84 lock profiles specific to DAF trucks. It is manufactured using the latest production technology, making it robust and versatile.

The Easy Tool HU84 Decoder provides stable and versatile operation thanks to its advanced technology.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Decoder Easy Tool Ivaylov HU66 GEN 2/3

This tool is designed for professional opening and decoding of VAG Group car locks (VW, AUDI, ŠKODA, SEAT, PORSCHE) from 2005 to 2014-2015. The decoder is developed using new technology that eliminates the problems of previous versions. Its updated design allows for faster tool installation, and all elements are reinforced to prevent breaks during use.

This patented tool was specially created for quick and accurate unlocking of HU66 GEN 2/3 locks in case of key loss. New technology ensures stability and safety in use, making it indispensable for professionals.

Easy Tool Ivaylov HU66 GEN 2/3 is suitable for all VAG Group cars such as VW, AUDI, ŠKODA, SEAT and PORSCHE, manufactured between 2005 and 2015.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

EASY TOOL Decoder HU66 GEN 1

This professional tool is an improved second generation of HU66 GEN 1 decoders. It is designed for fast and reliable lock opening, with improved and durable components that ensure easy reinstallation and a long service life.

The HU66 GEN 1 decoder is suitable for VAG Group car models (VW, AUDI, ŠKODA, SEAT, PORSCHE) from 1998 to 2004. It also supports ignition lock unlocking.

EASY Tool Decoder HU66 GEN 1 is a reliable solution for professional VAG Group lock opening, providing efficiency and ease of use.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

EASY TOOL Decoder TOY48 Toyota / Lexus

This decoder is designed for professional opening of locks on Toyota and Lexus cars.

EASY TOOL Decoder TOY48 is an effective tool for fast and safe opening of car locks.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

EASY TOOL Decoder HU101 Rover Ford Volvo Jaguar

EASY TOOL is an innovative tool for professional emergency opening of locks, as well as quick access to cars and homes. This tool is not related to the products under the Turbodecoder or Lucky Locks brands. It was developed by a master of his craft - **Dimitar Ivaylov**, who put all his knowledge, experience and energy into the project.

Advantages of EASY TOOL Decoder HU101

This decoder allows the operator to open and decode HU101 type locks without the need for special training or the use of complex techniques. Its use minimizes the risk of damage to the lock, door or other elements of the car.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

EASY TOOL Decoder HU83 PEUGEOT / Man Trucks / Citroen

The professional decoder HU83 is designed specifically for working with HU83 type lock profiles. The use of the latest technology makes the tool reliable and versatile.

Advantages of EASY TOOL Decoder HU83

- Reliability and durability: The decoder is made using modern technologies.
- Guaranteed quality: Each tool is manually tested on several locks.
- Versatility: Suitable for cars of various brands and trucks with laser locks.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

EAST TOOL Decoder HU100 Opel и Chevrolet

EASY TOOL is an innovative professional tool designed for emergency opening of locks, car or house doors. This is not a turbo decoder and has nothing in common with similar products under the Turbodecoder brand. The tool was developed by the outstanding master Dimitar Ivaylov, who put all his knowledge, experience and energy into it.

Features and advantages

- Reliability and durability: Unlike other products, our HU100 decoder is guaranteed not to break if used correctly.
- Proven quality: The decoder was tested on more than 90 locks of different types before being launched for sale.
- Ease of use: The tool is compact, lightweight and easy to learn. Once unlocked, it can be used on the ignition switch and also makes it easier to duplicate keys.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

EASY TOOL Decoder Mersedes HU64

The HU64 professional decoder allows you to open and decode locks easily and safely without the need for complex locksmith skills. The tool is designed for quick use, making it indispensable for professionals.

Features

- Ease of use: The decoder does not require complex technical skills.
- Fast and safe opening: Provides efficient and accurate unlocking of the lock.

This tool is the ideal choice for professionals who need a fast and reliable solution for opening cars.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

EASY TOOL Decoder HY22 Hyundai / Kia

Using the latest manufacturing technology, this tool is a step up from anything else on the market. We aim to make the new professional decoder available to a wider audience and provide new opportunities for lock picking around the world.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

EASY TOOL Decoder SIP22 FIAT / ALFA ROMEO

Thanks to modern production technologies, the SIP22 decoder occupies a leading position in the market.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

EASY TOOL Decoder for BMW series — F HU1OO-R

EASY TOOL is not just a turbo decoder, but a completely new innovative tool designed for professionals, which allows you to urgently open locks and safely and quickly open car or house doors. Our tool has nothing in common with similar devices under the turbo decoder brand. It was developed by a true master of his craft, Dimitar Ivaylov, who put all his soul, knowledge and energy into this product.

Please take this into account when evaluating and purchasing our product: this is a tool of our production, released under the brand of an outstanding developer of locksmith tools Dimitar Ivaylov. At first glance, our tool has nothing in common with similar products under the Lucky Locks and Turbodecoder brands.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Easy Tool Decoder HU92 for BMW E series

EASY TOOL is not just a turbo decoder, but a completely new innovative tool designed for professionals, intended for emergency opening of locks and safe, fast access to closed doors of cars or houses. Our tool has nothing in common with similar devices under the brand name of turbo decoder. It was created by a true master of his craft, Dimitar Ivaylov, who put all his soul, knowledge and effort into it.

When evaluating and purchasing our product, keep in mind that this is a tool of our own production, released under the brand name of an outstanding developer of locksmith tools Dimitar Ivaylov. At first glance, our tool has nothing in common with similar products under the brands Lucky Locks and Turbodecoder. The decoder is also compatible with Scania, Land Rover, MINI Cooper and Rolls Royce.

Designed with new technology, the HU92 decoder has corrected previous shortcomings and is now easier to install thanks to strong, non-breakable pins and parts that withstand the necessary tension for the fastest possible opening of locks.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

EASY TOOL Decoder Pump lock kit — decoder & pick tool

Pump Lock Kit is a very useful kit that helps both professionals and beginners in locksmithing in unlocking and decoding operations. This professional kit includes several useful tools for each operation! The kit includes: Potent Opener, CR Opener, ISEO Opener, Mottura 1-Opener + Decoder and Mottura 2-Opener + Decoder. In addition, the kit includes a universal handle for all decoding heads, a large number of spare pins and a carrying case.

Thus, the Pump Lock Kit is a complete set of tools for opening Mottura 1st and 2nd generation, Potent (all known lock sizes), CR (all known lock sizes) and ISEO (all known lock sizes) locks.

What do you get?

- Professional unlocking and decoding of several types of locks: Mottura 1st and 2nd generation, Potent (all known sizes), CR (all known sizes) and ISEO (all known sizes).
- Fast unlocking process
- Ease of use
- No damage

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Decoder EASY TOOL Pump Lock Decoder Cassel CR Viro Mattura Cerutti Potent SAG NEW

This is a great new patented product - PUMP LOCK DECODER!

With this revolutionary professional tool, Ivaylov's team became the only experienced company that was able to open and decode complex ISEO pump locks in situations where the key is missing. With this decoder, you will be able to overcome previous limitations and open ISEO pump locks in just a few seconds.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Automatic self-impression decoders Horizontal Cisa Abus Mauer Iseo

There is no tool that can open EVERY lock. So, a universal tool for these types of locks cannot exist! The operator must know which particular cylinder lock he is trying to open, so some locksmith skills are necessary.

These picks work WITHOUT ELECTRICITY. You apply medium voltage. The tool lifts each pin of the cylinder lock to a certain height until it “takes” the position corresponding to the original key. This creates a key profile. As a result, you get a fully functional two-sided profile that can open and close the lock just like the original key.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Set for Double-bit locks

For all professional locksmiths who want to become masters of their craft, this is the most effective and non-destructive tool kit. It is designed for automatic self-impression and allows each locksmith to open over 50 double-sided lever locks. This makes it the most useful and effective locksmith kit on the market.

The Double-sided Self-Impression Kit is a professional locksmith kit for experienced and novice locksmiths who want to solve any lock problem! This impressive kit includes several different tools, allowing each locksmith to professionally open over 50 double-sided lever locks. What's more, assembling additional combinations is also possible! For this, the professional kit includes several "soft" keys, various tension tools of varying sizes and shapes, as well as different pins and washers. In addition, a storage box is included.

For more detailed information about the functions, operating principle and compatibility models, contact us via your preferred messenger (Telegram, Whatsapp, Signal)

Feedback

Leave your details and our manager will contact you shortly